Result notes
Project Location
Snow Regions
Australia: This map is for general guidance only and is based on publicly available data from Geoscience Australia. It does not replace AS/NZS 1170.2, which takes precedence. Users must verify results against the Standard and project-specific engineering assessment. Extra care is required near wind region boundaries.
New Zealand: This map is based on an approximate interpretation of Figure 3.1(B) of AS/NZS 1170.2. Results are indicative only, particularly near region boundaries. Users must verify all information against AS/NZS 1170.2. DNode accepts no liability for reliance on this map.
Disclaimer: This tool is for general guidance only and is based on approximate regional mapping, Google Elevation data and site-specific datasets. It does not replace AS/NZS 1170.3, which takes precedence. Users must verify outputs against the Standard, surveyed site levels, Table 5.2 where applicable, and project-specific engineering assessment. Extra care is required near snow region boundaries and where site-specific values may govern. DNode accepts no liability for reliance on this tool without independent verification.
New Zealand: This map is based on an approximate interpretation of Figure 2.2 of AS/NZS 1170.3. Results are indicative only, particularly near region boundaries. Users must verify all information against AS/NZS 1170.3.
Sources and assumptions: Australian site values are from AS/NZS 1170.3:2003 Table 5.2. Google elevations are adjusted by +5 m in Australia; New Zealand and surveyed elevations receive no adjustment. Kt is assumed to be 1.0 for Australian alpine equation-based results and must be checked for the site.